Description
Cummins INSITE 10.2 is the newest release of the Cummins INSITE PC service application for electronically controlled Cummins engines. The version we install is INSITE 10.2.0.43 FT with Data Pack 10.2.0 DP (Copyright 2026 Cummins Inc.). It gives technicians access to fault information, live operating data, diagnostic tests, feature and parameter settings and service records, so a workshop can investigate complaints and document engine condition before and after service.
Cummins INSITE 10.2 version details
- INSITE Version: 10.2.0.43 FT
- Data Pack Version: 10.2.0 DP
- Release year: 2026
- Operating system: Windows 10 or Windows 11
Cummins INSITE 10.2 features
- Connect to ECM – connect to the engine control module through a compatible datalink adapter
- Fault Codes – read active and inactive fault codes with fault information
- Data Monitor/Logger – monitor live engine parameters and record data for later review
- ECM Diagnostic Tests – run supported diagnostic and service tests
- Advanced ECM Data – view detailed ECM data
- Features and Parameters – view and adjust supported feature and parameter settings
- Calibration Selection – select the calibration for the ECM
- Work Orders, ECM Images and ECM Templates – save ECM images and organize work
- Trip Information and Audit Trail – review trip data and the ECM change history
- Inquire Data Extraction – extract data for analysis
- OBD Monitors and J1939 Datalink Messages – check OBD monitor status and J1939 network messages
Available versions
This listing offers INSITE 10.2 (latest, 2026) together with INSITE 9.3, 9.2, 9.1, 8.9, 8.5 and 7.6. Choose the release and data package that match the engines and ECMs you service – a higher version number does not by itself prove compatibility or programming access.
Requirements
- Windows 10 or Windows 11 computer
- Compatible vehicle interface (datalink adapter) and the correct cables
- Internet access during the remote installation via TeamViewer or AnyDesk
Confirm the license level, activation terms and engine coverage before payment. ECM calibration downloads require the appropriate INSITE capability and permissions, which must be agreed separately.
Related Cummins software
- Cummins CalFix for INSITE – calibration files for INSITE
- Cummins InCal CE and Cummins InCal Tool
- Cummins Calterm 5.16 – advanced ECM calibration
FAQ
What is the latest version of Cummins INSITE?
Cummins INSITE 10.2 (10.2.0.43 FT with Data Pack 10.2.0 DP) is the latest release offered here.
Does INSITE 10.2 run on Windows 11?
Yes, INSITE 10.2 is installed on Windows 10 or Windows 11 computers.
Can I still buy an older INSITE version?
Yes. INSITE 9.3, 9.2, 9.1, 8.9, 8.5 and 7.6 can be selected in the Version option.
How is it installed?
Installation and activation are done remotely via TeamViewer or AnyDesk after purchase.
