PACCAR MX P0193 rail pressure signal high voltage – 2013 PACCAR

PACCAR MX P0193 is the fault code page for “Engine rail pressure – Voltage too high or short circuit to supply on ECU D420 pin A52” in the 2013 PACCAR MX Diagnostic Service Manual. PACCAR publishes it for engines in the EPA 2013 emissions family, and it is worked with the DAVIE diagnostic software.

What this fault code means

The manual describes P0193 as an engine rail pressure signal whose voltage is too high, or a short circuit to supply, on pin A52 of the D420 ECU. It shares the same pin and the same classification as its low-voltage twin: 1 trip MIL, 3 drive cycle recovery, no readiness group and a Fuel freeze frame type.

PACCAR MX P0193 page structure

This is a one-page entry. It carries the code number and the fault code description, then the standard headings used throughout the manual, but the detail under them is not printed on this page. The fault code information block does list 1 trip MIL, 3 drive cycle recovery, readiness group none, freeze frame type Fuel. Instead the page states: Please Contact the Engine Support Center. The footer gives the PACCAR Engine Support Call Center number, 1-800-477-0251.

  • Description and location of component
  • Diagnostic condition, set condition and reset condition
  • Electrical diagrams and technical data
  • Possible causes and additional information
  • Diagnostic step-by-step and verification drive cycle

Treat the page as a confirmed identification of the code plus an instruction on where the full procedure lives. That is still worth having in writing when a customer asks why the shop is calling the factory.

Document details and format

Field Value
Brand PACCAR
System group DTCs, MX Engines (EPA2013)
Source publication 2013 PACCAR MX Diagnostic Service Manual
Manual page 181
Pages 1
File size 0.3 MB
Format PDF, English

Applies to PACCAR MX P0193 repairs

The page sits in the DTCs section for MX engines built to the EPA 2013 emissions standard, so it covers trucks running that engine family with the PCI engine control unit. Coverage and dealer support are published on the PACCAR corporate site.

Who needs this PACCAR MX P0193 page

Technicians who read a high-voltage rail pressure signal on a PACCAR MX engine and want the manual page that names the ECU pin and the recovery behaviour.

The full PDF page is in the DiagTechPro manuals library; a free account downloads it. Keep the PACCAR MX P0193 sheet open next to DAVIE.

PACCAR MX P0193 rail pressure signal high voltage – 2013 PACCAR 1 / 1
PACCAR MX P0193 rail pressure signal high voltage – 2013 PACCAR - page 1 is available after signing in
1-page document. Sign in to download the full PDF. Create a free account to download the full PDFNo credit card required · Instant download

Sản phẩm liên quan cho hãng này

Cùng brand theo taxonomy hiện có trong catalog WooCommerce.

This entry was posted in . Bookmark the permalink.
Telegram Telegram us WhatsApp WhatsApp us